一、环境说明
| 节点名称 | ip地址 | 部署说明 | Pod 网段 | Service网段 | 系统说明 |
|---|---|---|---|---|---|
| k8s-master | 192.168.56.11 | docker、kubeadm、kubectl、kubelet | 10.244.0.0/16 | 10.96.0.0/12 | Centos 7.4 |
| k8s-node01 | 192.168.56.12 | docker、kubeadm、kubelet | 10.244.0.0/16 | 10.96.0.0/12 | Centos 7.4 |
| k8s-node02 | 192.168.56.13 | docker、kubeadm、kubelet | 10.244.0.0/16 | 10.96.0.0/12 | Centos 7.4 |
[root@k8s ~]# vim /etc/hosts //各个节点都需配置域名解析
192.168.56.11 k8s-master
192.168.56.12 k8s-node01
192.168.56.13 k8s-node02
（1）配置源
[root@k8s-master ~]# cd /etc/yum.repos.d/
配置阿里云的源：https://opsx.alibaba.com/mirror
[root@k8s-master yum.repos.d]# wget https://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo #配置dokcer源
[root@k8s-master ~]# cat <<EOF > /etc/yum.repos.d/kubernetes.repo #配置kubernetes源
> [kubernetes]
> name=Kubernetes
> baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64/
> enabled=1
> gpgcheck=1
> repo_gpgcheck=1
> gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
> EOF
[root@k8s-master yum.repos.d]# yum repolist #查看可用源
将源拷贝到node01和node02节点
[root@k8s-master yum.repos.d]# scp kubernetes.repo docker-ce.repo k8s-node1:/etc/yum.repos.d/
kubernetes.repo 100% 276 276.1KB/s 00:00
docker-ce.repo 100% 2640 1.7MB/s 00:00
[root@k8s-master yum.repos.d]# scp kubernetes.repo docker-ce.repo k8s-node2:/etc/yum.repos.d/
kubernetes.repo 100% 276 226.9KB/s 00:00
docker-ce.repo 100% 2640 1.7MB/s 00:00
（2）安装docker、kubelet、kubeadm、还有命令行工具kubectl
[root@k8s-master yum.repos.d]# yum install -y docker-ce kubelet kubeadm kubectl
[root@k8s-master ~]# systemctl start docker
[root@k8s-master ~]# systemctl enable docker
启动docker，docker需要到自动到docker仓库中所依赖的镜像文件，这些镜像文件会因为在国外仓库而下载无法完成，所以最好预先下载镜像文件，kubeadm也可以支持本地私有仓库进行获取镜像文件。
（3）预先下载镜像
在master节点上使用docker pull拉取镜像，再通过tag打标签
docker pull huyouba1/kube-proxy-amd64:v1.15.1
docker tag huyouba1/kube-proxy-amd64:v1.15.1 k8s.gcr.io/kube-proxy-amd64:v1.15.1
docker pull huyouba1/kube-scheduler:v1.15.1
docker tag huyouba1/kube-scheduler:v1.15.1 k8s.gcr.io/kube-scheduler-amd64:v1.15.1
docker pull huyouba1/kube-controller-manager:v1.15.1
docker tag huyouba1/kube-controller-manager:v1.15.1 k8s.gcr.io/kube-controller-manager-amd64:v1.15.1
docker pull huyouba1/kube-apiserver-amd64:v1.15.1
docker tag huyouba1/kube-apiserver-amd64:v1.15.1 k8s.gcr.io/kube-apiserver-amd64:v1.15.1
docker pull huyouba1/etcd-amd64:3.2.18
docker tag huyouba1/etcd-amd64:3.2.18 k8s.gcr.io/etcd-amd64:3.2.18
docker pull huyouba1/coredns:1.1.3
docker tag huyouba1/coredns:1.1.3 k8s.gcr.io/coredns:1.1.3
docker pull huyouba1/pause:3.1
docker tag huyouba1/pause:3.1 k8s.gcr.io/pause:3.1
docker pull huyouba1/flannel:v0.10.0-s390x
docker tag huyouba1/flannel:v0.10.0-s390x quay.io/coreos/flannel:v0.10.0-s390x
docker pull huyouba1/flannel:v0.10.0-ppc64le
docker tag huyouba1/flannel:v0.10.0-ppc64le quay.io/coreos/flannel:v0.10.0-ppc64l
docker pull huyouba1/flannel:v0.10.0-arm
docker tag huyouba1/flannel:v0.10.0-arm quay.io/coreos/flannel:v0.10.0-arm
docker pull huyouba1/flannel:v0.10.0-amd64
docker tag huyouba1/flannel:v0.10.0-amd64 quay.io/coreos/flannel:v0.10.0-amd64
node节点上拉取的镜像
docker pull huyouba1/k8s-pause:3.1
docker tag huyouba1/k8s-pause:3.1 k8s.gcr.io/pause:3.1
docker pull huyouba1/k8s-proxy-amd64:v1.15.1
docker tag huyouba1/k8s-proxy-amd64:v1.15.1 k8s.gcr.io/kube-proxy-amd64:v1.15.1
docker pull huyouba1/k8s-flannel:v0.10.0-amd64
docker tag huyouba1/k8s-flannel:v0.10.0-amd64 quay.io/coreos/flannel:v0.10.0-amd64
（4）kubeadm初始化集群
[root@k8s-master ~]# vim /etc/sysconfig/kubelet #修改kubelet禁止提示swap警告
KUBELET_EXTRA_ARGS="--fail-swap-on=false" #如果配置了swap不然提示出错信息
更改kubelet配置，不提示swap警告信息，最好关闭swap
[root@k8s-master ~]# swapoff -a #关闭swap
[root@k8s-master ~]# kubeadm init --kubernetes-version=v1.15.1 --pod-network-cidr=10.244.0.0/16 --service-cidr=10.96.0.0/12 --ignore-preflight-errors=Swap #初始化
[init] using Kubernetes version: v1.15.1
[preflight] running pre-flight checks
I0821 18:14:22.223765 18053 kernel_validator.go:81] Validating kernel version
I0821 18:14:22.223894 18053 kernel_validator.go:96] Validating kernel config
[WARNING SystemVerification]: docker version is greater than the most recently validated version. Docker version: 18.06.0-ce. Max validated version: 17.03
[preflight/images] Pulling images required for setting up a Kubernetes cluster
[preflight/images] This might take a minute or two, depending on the speed of your internet connection
[preflight/images] You can also perform this action in beforehand using 'kubeadm config images pull'
[kubelet] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
[kubelet] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
[preflight] Activating the kubelet service
[certificates] Generated ca certificate and key.
[certificates] Generated apiserver certificate and key.
[certificates] apiserver serving cert is signed for DNS names [k8s-master kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 192.168.56.11]
[certificates] Generated apiserver-kubelet-client certificate and key.
[certificates] Generated sa key and public key.
[certificates] Generated front-proxy-ca certificate and key.
[certificates] Generated front-proxy-client certificate and key.
[certificates] Generated etcd/ca certificate and key.
[certificates] Generated etcd/server certificate and key.
[certificates] etcd/server serving cert is signed for DNS names [k8s-master localhost] and IPs [127.0.0.1 ::1]
[certificates] Generated etcd/peer certificate and key.
[certificates] etcd/peer serving cert is signed for DNS names [k8s-master localhost] and IPs [192.168.56.11 127.0.0.1 ::1]
[certificates] Generated etcd/healthcheck-client certificate and key.
[certificates] Generated apiserver-etcd-client certificate and key.
[certificates] valid certificates and keys now exist in "/etc/kubernetes/pki"
[kubeconfig] Wrote KubeConfig file to disk: "/etc/kubernetes/admin.conf"
[kubeconfig] Wrote KubeConfig file to disk: "/etc/kubernetes/kubelet.conf"
[kubeconfig] Wrote KubeConfig file to disk: "/etc/kubernetes/controller-manager.conf"
[kubeconfig] Wrote KubeConfig file to disk: "/etc/kubernetes/scheduler.conf"
[controlplane] wrote Static Pod manifest for component kube-apiserver to "/etc/kubernetes/manifests/kube-apiserver.yaml"
[controlplane] wrote Static Pod manifest for component kube-controller-manager to "/etc/kubernetes/manifests/kube-controller-manager.yaml"
[controlplane] wrote Static Pod manifest for component kube-scheduler to "/etc/kubernetes/manifests/kube-scheduler.yaml"
[etcd] Wrote Static Pod manifest for a local etcd instance to "/etc/kubernetes/manifests/etcd.yaml"
[init] waiting for the kubelet to boot up the control plane as Static Pods from directory "/etc/kubernetes/manifests"
[init] this might take a minute or longer if the control plane images have to be pulled
[apiclient] All control plane components are healthy after 51.033696 seconds
[uploadconfig] storing the configuration used in ConfigMap "kubeadm-config" in the "kube-system" Namespace
[kubelet] Creating a ConfigMap "kubelet-config-1.11" in namespace kube-system with the configuration for the kubelets in the cluster
[markmaster] Marking the node k8s-master as master by adding the label "node-role.kubernetes.io/master=''"
[markmaster] Marking the node k8s-master as master by adding the taints [node-role.kubernetes.io/master:NoSchedule]
[patchnode] Uploading the CRI Socket information "/var/run/dockershim.sock" to the Node API object "k8s-master" as an annotation
[bootstraptoken] using token: dx7mko.j2ug1lqjra5bf6p2
[bootstraptoken] configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials
[bootstraptoken] configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token
[bootstraptoken] configured RBAC rules to allow certificate rotation for all node client certificates in the cluster
[bootstraptoken] creating the "cluster-info" ConfigMap in the "kube-public" namespace
[addons] Applied essential addon: CoreDNS
[addons] Applied essential addon: kube-proxy
Your Kubernetes master has initialized successfully!
To start using your cluster, you need to run the following as a regular user:
mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config
You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
https://kubernetes.io/docs/concepts/cluster-administration/addons/
You can now join any number of machines by running the following on each node
as root:
kubeadm join 192.168.56.11:6443 --token dx7mko.j2ug1lqjra5bf6p2 --discovery-token-ca-cert-hash sha256:93fe958796db44dcc23764cb8d9b6a2e67bead072e51a3d4d3c2d36b5d1007cf
如果是普通用户部署，要使用kubectl，需要配置kubectl的环境变量，这些命令也是kubeadm init输出的一部分：
mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config
如果是使用root用户部署，可以使用export进行定义环境变量
[root@k8s-master ~]# export KUBECONFIG=/etc/kubernetes/admin.conf
此处也需要记录输出的kubeadm join命令，后面的node节点加入到集群就需要用到此命令：
kubeadm join 192.168.56.11:6443 --token dx7mko.j2ug1lqjra5bf6p2 --discovery-token-ca-cert-hash sha256:93fe958796db44dcc23764cb8d9b6a2e67bead072e51a3d4d3c2d36b5d1007cf
该令牌用于主节点和加入节点之间的相互认证。这里包含的令牌是秘密的。保持安全，因为拥有此令牌的任何人都可以向集群添加经过身份验证的节点。可以使用该kubeadm token命令列出，创建和删除这些令牌。到此，集群的初始化已经完成，可以使用kubectl get cs进行查看集群的健康状态信息：
[root@k8s-master ~]# kubectl get cs
NAME STATUS MESSAGE ERROR
controller-manager Healthy ok
scheduler Healthy ok
etcd-0 Healthy {"health": "true"}
[root@k8s-master ~]# kubectl get node
NAME STATUS ROLES AGE VERSION
k8s-master NotReady master 43m v1.11.2
从上面的结果可以看到，master的组件controller-manager、scheduler、etcd都处于正常状态。那么apiserver到哪去了？要知道kubectl是通过apiserver进行通信，从而在etcd中获取到集群的状态信息，所以可以获取到集群的状态信息，即表示apiserver是处于正常运行的状态。使用kubectl get node获取节点信息，可以看到master节点的状态是NotReady，这是因为还没有部署好Pod网络。
（5）安装网络插件CNI
安装Pod网络插件，用于保证Pod之间的相互通信。在每个集群当中只能有一个Pod网络，在部署flannel之前需要更改的内核参数将桥接的IPv4的流量进行转发给iptables链，这是CNI插件的运行的前提要求。
[root@k8s-master ~]# cat /proc/sys/net/bridge/bridge-nf-call-iptables
1
[root@k8s-master ~]# cat /proc/sys/net/bridge/bridge-nf-call-ip6tables
1
[root@k8s-master ~]# kubectl apply -f http://huyouba1.github.io:81/kube-flannel.yml
clusterrole.rbac.authorization.k8s.io/flannel created
clusterrolebinding.rbac.authorization.k8s.io/flannel created
serviceaccount/flannel created
configmap/kube-flannel-cfg created
daemonset.extensions/kube-flannel-ds created
[root@k8s-master ~]# kubectl get node #再查看master节点的状态信息，就是已经是Ready状态了
NAME STATUS ROLES AGE VERSION
k8s-master Ready master 3h v1.11.2
（6）node01节点加入集群
[root@k8s-node01 ~]# yum install -y docker kubeadm kubelet
[root@k8s-node01 ~]# systemctl enable dokcer kubelet
[root@k8s-node01 ~]# systemctl start docker
这里需要提前拉取好镜像，如果docker配置了代理另说，按本次方法，提前拉取node节点所需要的镜像。
[root@k8s-node01 ~]# kubeadm join 192.168.56.11:6443 --token dx7mko.j2ug1lqjra5bf6p2 --discovery-token-ca-cert-hash sha256:93fe958796db44dcc23764cb8d9b6a2e67bead072e51a3d4d3c2d36b5d1007cf
[root@k8s-master ~]# kubectl get node
NAME STATUS ROLES AGE VERSION
k8s-master Ready master 7h v1.11.2
k8s-node01 NotReady <none> 3h v1.11.2
加入集群后，查看节点状态信息，看到node01节点的状态为NotReady，是因为node01节点上还没有镜像或者是还在拉取镜像。等待拉取完镜像就会启动对应的Pod。
[root@k8s-node01 ~]# docker ps
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
5502c29b43df f0fad859c909 "/opt/bin/flanneld -…" 3 minutes ago Up 3 minutes k8s_kube-flannel_kube-flannel-ds-pgpr7_kube-system_23dc27e3-a5af-11e8-84d2-000c2972dc1f_1
db1cc0a6fec4 d5c25579d0ff "/usr/local/bin/kube…" 3 minutes ago Up 3 minutes k8s_kube-proxy_kube-proxy-vxckf_kube-system_23dc0141-a5af-11e8-84d2-000c2972dc1f_0
bc54ad3399e8 k8s.gcr.io/pause:3.1 "/pause" 9 minutes ago Up 9 minutes k8s_POD_kube-proxy-vxckf_kube-system_23dc0141-a5af-11e8-84d2-000c2972dc1f_0
cbfca066b71d k8s.gcr.io/pause:3.1 "/pause" 10 minutes ago Up 10 minutes k8s_POD_kube-flannel-ds-pgpr7_kube-system_23dc27e3-a5af-11e8-84d2-000c2972dc1f_0
[root@k8s-master ~]# kubectl get pods -n kube-system -o wide
NAME READY STATUS RESTARTS AGE IP NODE
coredns-78fcdf6894-nmcmz 1/1 Running 0 1d 10.244.0.3 k8s-master
coredns-78fcdf6894-p5pfm 1/1 Running 0 1d 10.244.0.2 k8s-master
etcd-k8s-master 1/1 Running 1 1d 192.168.56.11 k8s-master
kube-apiserver-k8s-master 1/1 Running 8 1d 192.168.56.11 k8s-master
kube-controller-manager-k8s-master 1/1 Running 4 1d 192.168.56.11 k8s-master
kube-flannel-ds-n5c86 1/1 Running 0 1d 192.168.56.11 k8s-master
kube-flannel-ds-pgpr7 1/1 Running 1 1d 192.168.56.12 k8s-node01
kube-proxy-rxlt7 1/1 Running 1 1d 192.168.56.11 k8s-master
kube-proxy-vxckf 1/1 Running 0 1d 192.168.56.12 k8s-node01
kube-scheduler-k8s-master 1/1 Running 2 1d 192.168.56.11 k8s-master
[root@k8s-master ~]# kubectl get node #此时再查看状态已经变成Ready
NAME STATUS ROLES AGE VERSION
k8s-master Ready master 1d v1.11.2
k8s-node01 Ready <none> 1d v1.11.2
（7）增加集群的节点node02
[root@k8s-node02 ~]# yum install -y docker kubeadm kubelet
[root@k8s-node02 ~]# systemctl enable docker kubelet
[root@k8s-node02 ~]# systemctl start docker
同样预先拉取好node节点所需镜像，在此处犯错的还有，根据官方说明tonken的默认有效时间为24h，由于时间差，导致这里的token失效，可以使用kubeadm token list查看token，发现之前初始化的tonken已经失效了。
[root@k8s-master ~]# kubeadm token list
TOKEN TTL EXPIRES USAGES DESCRIPTION EXTRA GROUPS
dx7mko.j2ug1lqjra5bf6p2 <invalid> 2018-08-22T18:15:43-04:00 authentication,signing The default bootstrap token generated by 'kubeadm init'. system:bootstrappers:kubeadm:default-node-token
那么此处需要重新生成token，生成的方法如下：
[root@k8s-master ~]# kubeadm token create
1vxhuq.qi11t7yq2wj20cpe
如果没有值–discovery-token-ca-cert-hash，可以通过在master节点上运行以下命令链来获取：
[root@k8s-master ~]# openssl x509 -pubkey -in /etc/kubernetes/pki/ca.crt | openssl rsa -pubin -outform der 2>/dev/null | \
openssl dgst -sha256 -hex | sed 's/^.* //'
8cb2de97839780a412b93877f8507ad6c94f73add17d5d7058e91741c9d5ec78
此时，再运行kube join命令将node02加入到集群当中，此处的–discovery-token-ca-cert-hash依旧可以使用初始化时的证书
[root@k8s-node02 ~]# kubeadm join 192.168.56.11:6443 --token 1vxhuq.qi11t7yq2wj20cpe --discovery-token-ca-cert-hash sha256:93fe958796db44dcc23764cb8d9b6a2e67bead072e51a3d4d3c2d36b5d1007cf
[root@k8s-master ~]# kubectl get node
NAME STATUS ROLES AGE VERSION
k8s-master Ready master 1d v1.11.2
k8s-node01 Ready <none> 1d v1.11.2
k8s-node02 Ready <none> 2h v1.11.2
如果在集群安装过程中有遇到其他问题，可以使用以下命令进行重置：
$ kubeadm reset
$ ifconfig cni0 down && ip link delete cni0
$ ifconfig flannel.1 down && ip link delete flannel.1
$ rm -rf /var/lib/cni/
